Lesson 1: SmartConsole Basics

Build a confident foundation in AXYZ SmartConsole by reading the connected controller’s identity, machine state, coordinates and active program. Follow the file-selection and verification workflow while keeping the machine stationary.

In this lesson, you will learn:

  • Use F1 to identify the A2MC controller and confirm the machine connection.
  • Read the current state, active file and coordinates in Remote SmartConsole.
  • Use File Manager when an NC program needs transferring, then return to SmartConsole.
  • Use FILE to select the intended program and F2 to verify it.
  • Distinguish verification from execution, including the separate Run prompt after verification.

Key takeaway

Selecting or verifying a program does not prove that machining has started. In this view-only demonstration, the machine remains stationary; the Run prompt is declined deliberately.

Training note:Demonstrations use controller-connected equipment and synchronized digital twins. Follow approved machine-specific operating procedures and hands-on training before operating equipment.