Aluminum & Metal Composite Cladding

The World’s Leading Panel Fabrication Provider

 

Built for manufacturers who process large volumes of cladding materials and rely on speed and efficiency, the PANELBuilder system is the world’s leading all-in-one panel-fabrication solution on the market. By combining an advanced, easy-to-use software solution with a custom machine design, AXYZ has created a system that can process all types of cladding materials faster, more consistently and at a lower cost than ever before.

The conventional approach to the production of these panels has been to use panel saws, guillotines, notchers and turret punches. This method is extremely labor intensive and requires panels to be continually moved from one station to another.

Consistency and reliability of output also are major issues where multiple machines and operators are involved. Common materials in this industry are typically 50″, 62″ or 78″ wide and typically up to 196″ long. By delivering a CNC Router with the bed size to handle the full sheet in one piece, the PANELBuilder system reduces the risk of damage to the pre-finished panels.

Typically, hundreds or even thousands of panels are required in a single project. It is therefore important to maximize the material utilization to reduce costs and keep scrap to a minimum. PANELBuilder incorporates a sophisticated nesting algorithm that can address both simple and complex panel geometry to reduce process time and maintain high levels of efficiency.

Materials

 

Common materials in this industry are typically 50", 62" or 78" wide and typically up to 196" long. The PANELBuilder system has been designed to fit all standard sheet materials in one piece and is specifically designed to machine the following materials:

Aluminum CompositeCopper CompositeStainless Steel CompositeTitanium CompositeZinc CompositeSolid Aluminum
PANELBuilder CNC solution for Panel Fabricators and Cladding

PanelBuilder CNC Solutions for Panel Fabricators

The PANELBuilder system from AXYZ International are world leading CNC routing solutions designed specifically for the aluminum composite (ACM) market. By combining an advanced, easy to use software solution with…

Fabrication of an Aluminum composite panel for cladding

Fabrication of an ACM Panel

High speed grooving and cutting of aluminium composite material  

Pendulum Processing on a PANELBuilder CNC Router

Pendulum Processing

For seamless, continuous cutting it's possible to split the bed of the machine into 2 virtual zones so that the operator can process one sheet whilst making ready another, thus…

Barcode Reader for aluminum composite panel fabrication

Barcode Reader for ACM Fabrication

Using a barcode reader for higher productivity and improved workflow on an AXYZ CNC Router for ACM panel fabrication applications