5330 South Service Road, Burlington ON, L7L 5L1 - Phone: 905-634-4940 - Fax: 905-634-4966 - Toll Free: 1-800-361-3408
AXYZ 8000 SERIES
The 8000 Series offers a processing width of over 100" and starts with a standard processing length of 122", increasing in 24" increments. This format is the machine of choice for manufacturers who work with 8’ wide materials as called for in their products. These manufacturers include Sign makers, Ambulance / Automotive / RV Builders, Aluminum fabricators, Plastic Fabricators, Marine manufacturers, and more.
The 8000 series machine is an ideal platform for fabricators that want to be able to work with sheet materials that are 8’ wide or two sheets of 4’ wide material at the same time. Configured with a dual Carriage option you can machine high volume parts in a duplicate format, doubling your output capacity. This application is common for volume fabricators in the plastics / acrylics and aluminum business.
The AXYZ 8000 Series machine is a large machine with a large mass gantry. This is where the capacity of the AXYZ A2MC Controller is apparent. With easy adjustments for the acceleration and maximum speeds, the power of the seven segment motion profile really shines. By actively managing the Acceleration and Deceleration the finish quality of the parts from the machine increases dramatically. The easy to use AXYZ SmartConsole rides alongside the machine gantry for ease of startup, no matter where you are on the large machine bed.
|Standard Processing Width||101"|
|Standard Processing Length||120"|
|Optional Additional Length||24" Increments|
|Standard Gantry Clearance / Z stroke||6" / 10"|
|Optional Gantry Clearance||8", 10", 12"|
|Drive System||X, Y – Rack and Pinion Z – Ballscrew|
|Maximum Positioning Speed||1,000ipm (Optional 1,500ipm and 2,000ipm)|
|Control System||7 Segment motion profile|
|FPGA processor for high speed complex calculations|
|Dedicated true NC control – G and M codes|
|4 Gb onboard memory|
|Popular options||Collet Spindles|
|Direct drive servo motors on all axes|
|Multiple Routing heads|
|AVS Vision Registration system|
|Pneumatic Material Location Pins|
|High precision Helical Rack & Pinions on X and Y|
|Power requirements||208-230 V 3 Phase / 440-460 V 3 Phase|